1769-OF4CI | Allen Bradley 1769 Compact Analog I/O Module

Part Number: 1769-OF4CIModel: 1769 Compact Analog I/O ModuleBrand: Allen BradleyCondition: New & Original in Factory PackingFactory Warranty: 12 MonthsSpecifications:Model1769-OF4CIOutputs4 differential, individually isolatedOutput range0 20 mA4 20 mAFull scale range(1)0 21 mA3.2 21 mAResolution16 bits (unipolar) 0 20 mA: 15.91 bits, 0.323 ?A/bit 4 20 mA: 15.59 bits, 0.323 ?A/bitBus current draw5V DC, 145 mA24V DC, 120 mAHeat dissipation, max2.68 WConversion rate (all channels), max110 msLimited voltage/current(2)< 2.9 msResistive load on current output0 500 (includes wire resistance)Inductive load (current outputs), max0.1 mHField calibrationNone requiredAccuracy(3)?0.35% full scale @ 25 ?C (77 ?F)Accuracy drift with temperature?0.0058% FS per ?COutput ripple(4)?0.05% @ 0 50 kHzNonlinearity?0.05%Repeatability(5)?0.05%Module error?0.55%Output impedance>1 M Open and short-circuit protectionYesShort-circuit protection, max21 mAOutput overvoltage protectionYesOutput response at system powerup and power downNo current glitchRated working voltage(6)30V AC/30V DCIsolation voltage500V AC or 710V DC for 1 min (qualification test), output group to bus 30V AC/30V DC working voltage (IEC Class 2 reinforced insulation)Weight, approx270 g (0.60 lb)Dimensions (HxWxD), approx118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.)Height with mounting tabs 138 mm (5.43 in.)Slot width1Module locationDIN rail or panel mountPower supply1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4Power supply distance rating8 modulesTerminal screw torque0.68 N m (6 lb in)Retaining screw torque0.46 N m (4.1 lb in)Wire size(22 14 AWG) solid(22 16 AWG) strandedWire typeCu-90 ?C (194 ?F)Recommended cableBelden 8761 (shielded)Replacement terminal block1769-RTBN18 (1 per kit)Replacement door label1769-RL2 (2 per kit)Replacement door1769-RD (2 per kit)Vendor ID code1Product type code10Product code45Input words6Output words5Configuration words32Enclosure type ratingNone (open style)The over- or under-range flag comes on when the normal operating range (over/under) is exceeded. The module continues to convert the analog input up to the maximum full scale range. The flag automatically resets when within the normal operating range.Step response is the time between when the D/A converter was instructed to go from minimum to full range until the device is at 63% of full range.Includes offset, gain, nonlinearity, and repeatability error terms.Output ripple is the amount that a fixed output varies with time, which assumes a constant load and temperature.Repeatability is the ability of the input module to register the same reading in successive measurements for the same input signal.Rated working voltage is the maximum continuous voltage that can be applied at the input terminal, including the input signal and the value that floats above ground potential.For example, a 10V DC input signal and 20V DC potential above ground at the input terminal.Availability: In stockEstimated Lead Time: Ships in 1 - 7 working daysShipping Weight: 2 Kg