1769-IF16C | Allen Bradley 1769 Compact High-density Analog Input Module

Part Number: 1769-IF16CModel: 1769 Compact High-density Analog Input ModuleManufacturer: Allen BradleyCondition: New & Original in Factory PackingFactory Warranty: 12 MonthsSpecifications:Model1769-IF16C Inputs16 single-endedInput range0 20 mA; 4 20 mAFull scale range?0 21 mA; 3.2 21 mACurrent draw @ 5.1V190 mACurrent draw @ 24V70 mAHeat dissipation, max4.0 WConverter typeSigma DeltaResolution?16 bits (unipolar); 15 bits plus sign (bipolar)Rated working voltage?30V AC/30V DCCommon mode voltage range4?10V DC max per channelCommon mode rejection> 60 dB @ 50 and 60 Hz with the 16 Hz filter selectedInput impedance249 Accuracy5?0.5% full scale @ 25 ?C (77 ?F)Accuracy drift with temperature?0.0045% per ?CNonlinearity?0.03%Repeatability6?0.03%Module error1.25%Overload at input terminals, max7?28 mA continuous, ?7.6V DCIsolation voltage500V AC or 710V DC for 1 minute (qualification test), group to bus30V AC/30V DC working voltage (IEC Class 2 reinforced insulation)Weight, approx281 g (0.62 lb)Dimensions (HxWxD), approx118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.)Height with mounting tabs 138 mm (5.43 in.)Slot width1Module locationDIN rail or panel mountPower supply1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4Power supply distance rating8 modulesTerminal screw torque0.68 N m (6 lb in)Retaining screw torque0.46 N m (4.1 lb in)Wire size(22 14 AWG) solid; (22 16 AWG) strandedWire typeCu-90 ?C (194 ?F)Replacement terminal block1769-RTBN18 (1 per kit)Replacement door label1769-RL2 series B (2 per kit)Replacement door1769-RD (2 per kit)Vendor ID code1Product type code10Product code47Input words22Output words2Configuration words98Enclosure type ratingNone (open-style)The over- or under-range flag comes on when the normal operating range (over/under) is exceeded. The module continues to convert the analog input up to the maximum full scale range. The flag automatically resets when within the normal operating range.Resolution is dependent upon your filter selection. The maximum resolution is achieved with either the 50 or 60 Hz filter selected.Rated working voltage is the maximum continuous voltage that can be applied at the input terminal, including the input signal and the value that floats above ground potential.For example, a 10V DC input signal and 20V DC potential above ground at the input terminal.For proper operation, both the plus and minus input terminals must be within ?10V DC of analog common.Includes offset, gain, nonlinearity, and repeatability error terms.Repeatability is the ability of the input module to register the same reading in successive measurements for the same input signal.Damage can occur to the input circuit if this value is exceeded.Availability: In StockEstimated Lead Time: Ships in 7 Working DaysShipping Weight: 2 Kg