1762-IF4 | Allen Bradley MicroLogix Analog Input Module

Part Number: 1762-IF4Type: MicroLogix 4 Point Analog Input ModuleBrand: Allen BradleyCondition: New & Original in Factory PackingFactory Warranty: 12 MonthsGeneral SpecificationsDimensions, HxWxD: 90 x 40.4 x 87 mm (3.54 x 1.59 x 3.43 in.)Approximate shipping weight (with carton): 235 g (8.28 oz)Bus current draw, max: 40 mA @ 5V DC; 50 mA @ 24V DCAnalog normal operating range: Voltage: -10 10V DC; Current: 4 20 mAFull scale? analog ranges: Voltage: -10.5 10.5V DC; Current: -21 21 mAResolution: 15 bits (bipolar)Repeatability?: ?0.12%Input group to system isolation: 30V AC/30V DC rated working voltage? (IEC Class 2 reinforced insulation) type test: 500V AC or 707V DC for 1 minModule power LED: On: indicates power is applied.Recommended cable: Belden 8761 (shielded)Vendor ID code: 1Product type code: 10Product code: 67 Wiring category4: 2 - on signal portsPilot duty rating: Not ratedEnclosure type rating: IP20North American temp code: T3CNOTE:The over- or under-range flag comes on when the normal operating range (over/under) is exceeded. The module continues to convert the analog input up to the maximum full scale range.Repeatability is the ability of the input module to register the same reading in successive measurements for the same input signal.Rated working voltage is the maximum continuous voltage that can be applied at the terminals with respect to earth ground.Use this Conductor Category information for planning conductor routing.Availability: In stockEstimated Lead Time: Usually Ships in 5 Working DaysShipping Weight: 2 Kg